Description: The Brewco B-1600 Grade Run-Around System is designed to take 4 sided logs up to 16”x16”x16’ squared by your existing head rig and resaw these cants into high quality band sawn lumber.   Your yield improves dramatically due to the very thin kerf (.082”).  Your production also increases because you take 4 sided logs away from your head rig and finish them with the resaw.  Brewco is the leader in resaw systems such as this and we have hundreds of run-around systems cutting millions of board feet of lumber every day.

Testimonials:

“We tried a competitor’s Run-Around system before we bought our Brewco. What a disaster. It’s now plain to see that not just anybody can build a good run-around. Now that we run a Brewco, our lumber has never looked better, our production has never been greater, and our profits have never been higher!” Larry Smith Landmark Wood Products
6/19/2006 10:35:11 AM

“I’m now running my 4th Brewco B-1600 Run-Around System and average 100,000 bf/day of grade lumber. You can’t match their technology and service and overall performance.” Ricky Fly Fly Timber
6/19/2006 10:35:47 AM

“If you are going to run a 2” band, and you want to cut high production and accurate lumber, you better buy a Brewco. We’ve been running ours for over 5 years now and 22,000 bf/day is a low average. We’ve made our best money since we bought our Brewco. And what’s really important is you can trust what they say. They’ve been there from day one and have never let us down.” Dennis Curtis Buckhorn Manufacturing
6/19/2006 10:51:44 AM

“You simply won’t be able to compete much longer if you are only running a circle saw with no thin-kerf Resaw operation, and Brewco’s Resaw is the best one built.” Mark Dixon East Tennessee Wood Products
6/19/2006 10:52:02 AM

“We run 2 Brewco B-1600 Grade Run-Around Systems at 2 mills and average over 27,000 bf/day of total footage at each mill. One operator has just enough time to turn for grade and keep the Brewco Butt-fed for production. That’s the key to success for us.” Hugh Clark Clark Lumber
6/19/2006 10:52:16 AM

“You can pay more for a Resaw or less for a Resaw, but you can’t buy one better than a Brewco. I just built a brand new 2 story mill with all the best equipment made and the Brewco is my main moneymaker!” Ronnie Holley Holley Lumber
6/19/2006 10:52:34 AM

“I process 5 trailer loads of logs each day. Before I installed a B-1600, I’d average 16-18,000 bf. Now I average 20-22,000 bf from the same number of logs. No system will run at full potential straight out of the box. With a few modifications I was able to achieve a good consistent flow of lumber. With Brewco’s layout and automation there is ample storage for all products and there are no surges of material. The employees enjoy a smooth metered pace of work. Brewco’s warranty is excellent. Technical service and advice are essential. With Brewco’s staff, you have the best of both. Scott Cushman Cushman Lumber
6/19/2006 10:52:52 AM

“I yanked out my line bar Resaw and put in a Horizontal Brewco Resaw with a 2” band. I got rid of my filing room nightmare and I make perfect dust free Hard Maple boards at temperatures that drop to 30 below!” Brian Miljevich MLC
6/19/2006 10:53:15 AM

“Our mills produce 45 million board feet/year of hardwood lumber. We put a Brewco Resaw at one of our operations and its 20,000 bf/day production is done with a much lower operating cost than any of my other operations. The production of my Brewco is actually HIGHER than expected. How often does that happen?” Bruce Reynolds Rives and Reynolds
6/19/2006 10:53:32 AM